Radio Band For Safety Edges
Bidirectional radio band for resistive 8, 2KΩ or contact safety edges.
Tag TC06
Product Details
Our kit TC06 is composed of
- 1 receiver
- 1 transmitter
When the safety edge encounters an obstacle, the transmitter receives a signal and sends it by radio to the receiver. The transmitter is self-powered by 2 batteries 1.5V ; transmitter and receiver are both housed in weather-proof ABS boxes for outdoor use (IP55).
TC06 radio band is particularly recommended as additional safety device on automatic gates, automatic access and barrier where it is impossible to cable from the gate to the electric board.
Documentation
| Name | Type |
|---|---|
| ADG-TC06-Radio-Band-for-Safety-Edges-Brochure.pdf |
Specifications
Receiver
- Power Supply : 12 - 24 Vac / dc
- Consumption : 25 mA @ 12V
- Frequency : 868MHz
- Range* (in free space) : 50m*
- Relay contact : 2
- Memory capacity : 8 transmitters
- Opening T° : -20°C / +55°C
- Protection rating : IP 55
- Dimensions : 120mm x 90mm x 30mm
- Weight : 200g
*CAUTION : information about communication range : measured distances depend on each product set-up and installation environment. External interferences may reduce the range.
Transmitter
- Power Supply : 2 Batteries 1.5V
- Frequency : 868MHz
- Range* (in free space) : 50m*
- Opening T° : -20°C / +55°C
- Protection rating : IP 55
- Dimensions : 54mm x 26mm x 173mm
- Weight : 150g
*CAUTION : Information about communication range : measured distances depend on each product set-up and installation environment. External interferences may reduce the range.
